2 ton Capacity Foldable Shop Crane

2-ton-capacity-foldable-shop-crane

The 2 ton Capacity Foldable Shop Crane from Harbor Freight Tools delivers the lift you need up to 4,000 pounds and has the advantage of compact storage because of its foldable design. The crane includes ram, chain and hook and features double ball bearing swivel casters. The boom extends from 41 inches to 61-3/4 inches and the crane height adjusts from 73-5/8 in. to 89 in.

Customers really love it:

Have used shop cranes for 40 years, this one does exactly what I want it to do for a low price. Fit and finish is excellent, works great. Folds up to be a small footprint in my shop. Love it! – Dave, Parkersburg, WV

Well made for the price. Works just fine and folds up to about the size of a floor press. You can’t go wrong with this. – Ernie, Franklin, VA

I read the reviews before I purchased this shop crane. My experience is if you had any problems with assembly, you did not read the instructions. It went right together. The parts were all there, fit correctly and took only about 45 minutes together. I lifted the body off my 1965 Corvette and the engine out of the chassis. This crane handled both tasks with ease. No leaking cylinder. Folds with ease and stores in the corner. Exactly what I was looking for. – 92BlueC4, Denver, NC

You can pick up the 2 ton Capacity Foldable Shop Crane at your local Harbor Freight tools store.

2 ton Capacity Foldable Shop Crane
item#69514

3 gal. 1/3 HP 100 PSI Oilless Pancake Air Compressor

3-gal-one-third-hp-100-psi-oilless-pancake-air-compressor

Harbor Freight’s 3 gal. 1/3 HP 100 PSI Oilless Pancake Air Compressor delivers great performance with low maintenance. Plus, the low-profile design provides easy portability and a small footprint for storage. Other features include air delivery of 0.6 CFM at 90 PSI and 1.0 CFM at 40 PSI, built-in accessory storage, easy-to-read gauges, fully enclosed motor housing with easy carry handle, quick-connect coupler and thermal overload protection.

This compressor is ideal for inflation, stapling, nailing and more! Here’s what customers are saying:

For the price this is an amazing value. It has been perfect for inflating tires, air drying parts, blowing residue out of fluid lines, etc. It cost less than the air tank (no compressor) that it replaced. It will also run air tools … Every time I use it, I am glad I bought it. – Paul, Los Angeles, CA

We needed a small compressor to fill air pillows for some outbound shipments and this works exactly as needed. – Zimbo, Coppell, TX

Lite & easy to use. Quickly fills inflatable rafts, wonderful for air brush painting furniture, bicycles etc. Love It! So affordable and easy, every garage should have one! – Kat, Hawthorne, NV

You can pick up the 3 gal. 1/3 HP 100 PSI Oilless Pancake Air Compressor at your local Harbor Freight Tools store.

3 gal. 1/3 HP 100 PSI Oilless Pancake Air Compressor
item#61615

1.5 HP Electric Pole Saw

7 Amp Electric Pole Saw

The long-reach 1.5 HP Electric Pole Saw from Harbor Freight Tools provides a quick and safe way for trimming high tree branches. The telescoping fiberglass pole extends from 6 ft. to 8 ft. 10 in. And with the easy chain adjustment for convenience, you’ll prune trees like a pro! Safety features include a reduced kickback design and hand guard.

The 1.5 HP Electric Pole Saw has received high praise from customers, averaging 4.5 out of 5 starts after 400+ reviews:

I used this immediately after easy assembly trimming about six ash tree limbs approximately the size of my forearms. It cut flawlessly like a hot knife through butter. – Ken, Hamel, MN

This pole saw is a great tool for small high up jobs. Pretty light weight and very powerful. – Sam, Olympia, WA

Trim one tree yourself and you’ve saved more than the cost of the saw. Plenty of reserve power. Easily cut off branches up to 5-6 inches thick. – Kevin, Newport, PA

This little saw has already paid for itself by allowing me to trim without a ladder. Very sharp blade & self-oiling. – Harry O, Hilliard, OH

You can pick up the 1.5 HP Electric Pole Saw at your local Harbor Freight Tools store.

1.5 HP Electric Pole Saw
Item #: 62896

90 Amp-AC, 120 Volt, Flux Cored Welder

90 Amp-AC, 120 Volt, Flux Cored Welder

The 90 Amp-AC, 120 Volt, Flux Cored Welder from Harbor Freight Tools provides the functionality of a MIG welder without the hassle of gas. This Flux Core Arc Welder (FCAW) is specifically designed to use self-shielding flux-cored welding wire, eliminating any need for gas and regulators normal MIG welders require. With a variable speed wire control and thermal overload protection, this flux wire welder is easy to use with mild, low alloy steel. It’s not suitable for aluminum or stainless steel.

Here’s what customers are saying about this welder:

Love this welder for thin sheet metal work and welding up to 3/32″ thick steel. Works great right out of the box. Have tried several name brand wires with it and the one that works best is actually Harbor Freight-branded wire. I have the least amount of spatter, and slag with their wire. – BryWilder, Continental, OH

Very easy setup, makes very nice welds. I’ve used it off and on for about a week with no issues. Great product for the money. Fantastic buy. – Jimmy, Dothan, AL

I’ve used this machine to repair several mower decks, repair a garden cart, & convert an old workmate style bench into a welding table… What I really like is it runs off 120 volt which makes it portable … – Tallahasse Handyman, Tallahasse, FL

Pick the 90 Amp-AC, 120 Volt, Flux Cored Welder as well as welding accessories from your local Harbor Freight Tools store.

90 Amp-AC, 120 Volt, Flux Cored Welder
item#61849

12” Sliding Compound Miter Saw

12” Sliding Compound Miter Saw

Harbor Freight’s 12 In. Double-Bevel Sliding Compound Miter Saw With Laser Guide System makes smooth cuts in large work pieces up to 12 inches in width. The trigger-activated laser guide makes it easy to line up and cut wood accurately, including 45 degree left or right bevel cuts. Additional features include a powerful 15 amp motor and dual linear slide rails for stability.

Check out these customer reviews:

This is a great saw for home projects, etc. The sliding arms allow you to cut 2×12’s with ease. The 12 inch blade cuts better than smaller blades and will last longer. Cutting miters and bevels is much easier with a sliding saw too. – Don Ho, Western Colorado

Great value, Easy to use, set up and works hard. – Mark the Handyman, Kansas City, MO

Put down over 500 square feet of laminate flooring using this saw. The cuts were excellent, and this was set up and ready out of the box, 90 degree angle and all. Will use for molding, and other related projects. Seems well built, and you can’t beat the price … 3railgreg, Vermont

Pick up the 12 In. Double-Bevel Sliding Compound Miter Saw With Laser Guide System at your local Harbor Freight Tools store!

12 in. Double-Bevel Sliding Compound Miter Saw With Laser Guide System
item#61969

Blade sold separately.

700 lb. Capacity Bigfoot Hand Truck

700 lb. Capacity Bigfoot Hand Truck

This rugged 700 lb. Capacity Bigfoot Hand Truck from Harbor Freight Tools features extra-large 13-inch tires for a smooth ride across all surfaces. Additional features include long axle braces enabling easy stair climbing, p-shaped handle, heavy gauge toe plate with rounded corners and a beveled front. Heavy duty ball bearing hubs make this sturdy hand truck suitable for lawn and garden applications as well as moving big items in the factory, shop or warehouse.

Check out what customers are saying about this sturdy hand truck:

Bought it to move a washing machine into my basement. The welded fenders make it as wide as an appliance dolly and the tires are large enough to handle the steps. Just put a ratchet strap around it and you’re good to go. – Sprek, Rockford, IL

We are doing temporary off-site storage of our stuff until our new house is built and this is the perfect tool so my back does not kill me from all the lifting we have to do over the next 8 months while this is going on. It is heavy duty, nice and wide for boxes, the balloon tires make it easy to roll and go up and down steps and into storage containers. – Bonnie, Oregon

I bought this just over a year ago for our rural property … The pneumatic tires make this hand truck a star on rough ground. It will roll over nearly anything with the load undisturbed. It will also haul anything that I can get on it from rocks to sections of a power pole to appliances … – Raven Dave, outside Eugene, OR

You pick up the 700 lb. Capacity Bigfoot Hand Truck at your local Harbor Freight Tools store.

700 lb. Capacity Bigfoot Hand Truck
item#62900

72 in. 18 Drawer Glossy Red Industrial Roller Cabinet

72 in. 18 Drawer Glossy Red Industrial Roller Cabinet

The industrial 72 in. 18 Drawer Glossy Red Industrial Roller Cabinet from Harbor Freight Tools has over 34,300 cu. in. of tool storage space and can hold up to 4602 lbs. of tools, equipment and accessories. The cabinet also features a heavy duty powder coat finish, all steel construction and two separate drawer locks with one spare key each. Non-slip rubber mats in the drawers keep your tools organized while a spring-loaded latch keeps doors shut even when maneuvering the tool cabinet on its rugged 6 in. casters.

Customers often express how this cabinet compares to name brand cabinets but is a much greater value:

I have compared to my brother’s Snap-On that he payed $10,000 for. There is no reason to pay that much for a box. The drawer liners are a good quality. – Strokedimpala, Dutchess, NY

I love it. The size and quality for the price are great … I could buy something similar off one of the tool trucks but it would cost at least 5 times as much and nowhere near 5 times the quality. I can buy a lot of tools for what I saved on a tool box. Don’t hesitate. This is a great box for the money. –  Andrew Johnson, Norfolk, NE

Have owned most major brands of tool chests from store brands to commercial truck brands. This 3 bay 72″ PRO series tool chest will stand up to any box out there in construction and the materials used to make it. You look under the box and see massive steel structure for the nice casters to mount to with real bolts more than big enough. The welds look really good and all the riveting is tight. They did not cut corners when constructing this box and it is worth twice what you pay for it … ker, Atlanta, GA

Hands down is just as nice as a $7,000 Snap-On or similar toolbox. – Greg, Chantilly, VA

Pick up the 72 in. 18 Drawer Glossy Red Industrial Roller Cabinet at your local Harbor Freight Tools store.

72 in. 18 Drawer Glossy Red Industrial Roller Cabinet
item#61656

10 in., 13 Amp Benchtop Table Saw

10 in., 13 Amp Benchtop Table Saw

The 10 in., 13 Amp Benchtop Table Saw from Harbor Freight Tools features an extra-wide die cast aluminum table to support a large range of ripping applications, powerful 12 amp motor that delivers up to 5000 RPM for smooth cutting and an adjustable miter gauge for accurate cross cutting and overload protection. The table saw also features a 3 in. rear dust chute for a cleaner working atmosphere.

Check out these customer reviews:

I use the product in house projects. It is very easy to operate and at a very competitive price. – Miguel Angel, Miami, FL

I bought this saw because I didn’t want to pay a lot for one and so far it seems to be just as good as the top brand saws on the market. It cuts smooth and I’ve ripped down 1×4’s to use as window jams and it is very accurate as every board is smack dab against the window with no cracks. Very straight cut … Lowoncash95, Pageland, SC

I have a woodworking shop and this 10″ table saw is a great addition. The safety features and the sawdust port makes this a must-have for my shop. – woodworkingforfun, Hazel Green, WI

You can pick up the 10 in., 13 Amp Benchtop Table Saw at your local Harbor Freight Tools store.

10 in., 13 Amp Benchtop Table Saw
item#68827

(stand sold separately)

4 in. x 36 in. Belt/6 in. Disc Sander

combo sanderThis combination sander is a great addition to any garage or shop. The adjustable belt sands inside and outside curves with ease and accuracy, creating smooth finishes. Other features including a powerful ¾ HP motor, reinforced steel motor housing, cast aluminum table that tilts up to 60° for use with belt or disc and a miter gauge for sanding angles on workpieces.

Check out customer reviews about the 4 in. x 36 in. Belt/6 in. Disc Sander:

Hands down the best deal for a tool like this …. Bill, Florida

When building Adirondack chairs I had to round off the edges and angle cuts. Worked very well and a lot easier than a handheld belt sander. Easy to assemble and even easier to use. – Rod the rookie carpenter, Texas

Comparing the size, price and features, this product cannot be beat … – wolves69, Parkersburg, WV

This unit is well built, performs just like a much higher priced machine. I am very satisfide with this purchase. For a do-it-your-selfer this is a machine you could only hope to find at this sale price, but Harbor Freight did it. Thank you! – Donnie the bee, Englewood, FL

Pick up the 4 in. x 36 in. Belt/6 in. Disc Sander at your local Harbor Freight Tools store.

4 in. x 36 in. Belt/6 in. Disc Sander
item#97181

Solar Panel Kit

45 Watt Solar Panel Kit 10 Pc KitNow you can get free power with the 45 Watt Solar Panel Kit 10 Pc Kit from Harbor Freight Tools. Easy to install, the solar panel kit comes with three 15 watt solar panels, voltage regulator, mounting hardware and the basic connections needed to generate clean, efficient solar power.

Here’s what customers are saying about the solar panel kit:

I’m using this in my 500 sq ft cabin I’m building. It runs the 2 lights that came with it and 2 large fans to keep me cool in this 100 plus heat we’re having. With 1 fan it was charging as fast as I was using. With 2 it will run for 6 days without a problem. I am using 2 car batteries in parallel and it charges both great. I would recommend this product to anyone. – Spavinawmark, Yale, OK

This is the third solar panel kit I have purchased from Harbor Freight over the years. Each one was used to keep my batteries powered up in an RV. They have all performed very well. The latest has a modification to the frame which is sturdy and more convenient. The control box has also been updated with computer type connection. One of the kits was attached directly to the top of my RV which worked exceptionally well. No regrets. – Sam, St. George, UT

I bought this kit to use in my truck camper. I’m using two HF deep cycle batteries and the HF 400 watt inverter. I’m able to run a laptop, a fan, light and recharge phone and camera batteries. Both batteries will charge back to full in one sunny day. – Chris, NH

I think for the money this is one of the best I have found. I bought the 10×12 greenhouse and I am going to hook up a hydroponic system. The solar panels will run the pump and fans. I bought a few car batteries and can’t wait till I run the system. – Garden Guru, Orlando

Pick up the 45 Watt Solar Panel Kit 10 Pc Kit at your local Harbor Freight Tools store.

45 Watt Solar Panel Kit 10 Pc Kit
item#68751